Tech

Natural Trifield EM Meter

The Natural Trifield EM Meter detects changes in extremely weak static DC or "Natural" electric and magnetic fields. It signals with both a tone and the movement of a needle-type gauge if either the electric or magnetic field changes from previous levels. A radio and microwave detector is also included, which reads radio power directly if any transmitters are nearby. Man-made AC electric and magnetic fields are very common and could interfere with readings of static fields, the meter has been designed to ignore the AC fields of power lines, appliances, etc.

EMF Meter - Digital Read out

The EMF tester is designed to provide the user a quick, reliable and easy way to measure electromagnetic field radiation levels around power lines, home appliances, and industrial devices. The EMF tester is a cost effective, hand-held instrument designed and calibrated to measure electromagnetic field radiation at different bandwidths down to 50 Hz / 60Hz. The instrument displays micro Tesla & milli Gauss in the same tester.

K-II EMF Meter

The K-II EMF meter is a compact and easy to use magnetic field strength meter. The EMF meter can be used indoors or outdoors for measuring any electric device or power lines. There are 5 LED lights, each represents a field strength as follows:

GREEN - "Normal" zone -Normal background magnetic field - 0 to 1.5 milligauss.

GREEN- "Low" zone - Low level Magnetic Field 1.5 to 2.5 milligauss.

YELLOW - "Caution" zone - Mid-level magnetic field - 2.5 to 10 milligauss.

ORANGE - "High" zone - high level magnetic field - 10 to 20 milligauss.

RED - "Warning" zone - extremely high magnetic field - 20 + milligauss.

The K-II meter is an excellent tool to use to have a conversation with spirits in theory, using yes and no questions for example : one flash of lights for" yes" and two flashes for" no" or 3 flashes or more for "I don't know." Different combinations can be used to produce different results. Paranormal investigators have found this tool to be highly reliable to achieve contact with spirits and to talk to them.

Voice Recorder- (Analog)

This recorder uses micro cassettes for recording electronic voice phenomena and is one of many tools used for EVP'S. When the recording is played back you can hear a motor noise in the background but the evp can still be heard , so some software may be needed to clean up the motor background noise. This tool is still very effective to use, the only disadvantage is you have to fast forward or rewind to mark spots where evp's have been detected.

Voice Recorders - (Digital)

Very effective tools for evp's and preferred choice of use for investigators. Digital recorders have on average 4 to 5 folders to hold many hours of recorded footage and can be directly downloaded to computers if equipped with a USB port. Most recorders can play at fast speeds or extremely slow which comes in handy to monitor or track a possible evp.

Cell Sensor - EMF Meter

Delivers audible and visual alerts upon detection with on/off control

Detects & measures fields generated by power lines, computer monitors, TVs, Appliances, Wiring & more

Remote probe with 2 foot extension for ease and accuracy

Two scales, 0-5 and 0-50 milli Gauss

Calibrated around 835 MHz - will measure power density expressed in milliWatts per square centimeter emitted by analog or digital as well as GSM or PCS mobile phones

High sensitivity scale 0-1 and Normal Sensitivity scale 0-10 mW/cm2

Durable packaging doubles as storage

Requires one 9V battery

Mel-Meter EMF Ambient Temp Detector

The Mel-8704 -R meter is extremely handy on paranormal investigations since having both an EMF and ambient temp reading both on the same screen which also had a back light for night operations. The ambient temp is provided by a K-type thermocouple sensor for measurement and fast response time. The meter is equipped with an led glow lamp available to switch ON / OFF.

There are 3 EMF measuring ranges, 20 micro Tesla/200 micro Tesla/2000 micro Tesla and 200 mG/2000mG/20000 mG. The meter operates on a DC 9 volt battery. There are other Mel meters that can measure vibrations and have a K-II meter built into the unit for added EMF measurement.

Camcorder Sony Handy Cam with IR Light

The sony Handy Cam works extremely well with an added IR light when the night shot feature is used from the camera. Night vision works very well on this camera which is equipped with an internal memory, compact dvd recording, and the sd card whether it be 2GB, 4GB, 8GB, 16GB or 32 GB's for recording many hours of video footage. The lense system is extremely well crafted for a good sharp image and focusing. There are other types of camcorders that work well also, but this type of camcorder has prooved to work really well with different types of IR lights.

The camcorder takes different sizes of lithium batteries for power source. The batteries can be plugged into a wall outlet using an A/C adapter to charge the batteries.

LED Headlamp with Red Lense

The LED headlamp with red lense comes in handy on investigations when lighting is needed. There are 3 settings of led lighting and the fourth is the red light for night investigations This lamp is powered by 3 AAA batteries.